Filter
Top Products
Setting Up the Projector 23
Connecting a Composite Video Source
If you’re connecting a composite video device, use a
commercially-available RCA A/V cable. Before starting, make sure the
projector and your DVD player or other video source are turned off.
1. Connect the yellow RCA plug on one end of the cable to the
projector’s yellow
Video jack as shown below.
2. Connect the yellow plug on the other end of the cable to the
video-out port on your video source.
3. To play sound through the projector, follow the instructions
beginning on page 27.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 30 for instructions.
If more than one device is connected to the projector, select
Video as
the input source after projection starts. See page 32 for details.