Filter
Top Products
Setting Up the Projector 27
Playing Sound Through the Projector
The projector has a built-in speaker with a maximum output of 5 W.
You can play sound from your video equipment through the
projector’s speaker if your video device has an audio output port.
For RCA-Style Audio Output Ports
Most video devices have an RCA-style audio output port. In this case,
use the audio adapter supplied with the projector to connect the
projector to a commercially-available A/V cable, as shown below:
1. Locate the audio adapter that came with your projector.
2. Connect the black audio plug on one end of the adapter to the
Audio jack corresponding to your video source. For example, if
you’ve connected your video device to the projector’s
Video port,
connect the adapter to the
Audio jack next to it.
3. Connect the red and white plugs on the other end of the adapter
to the red and white plugs on the A/V cable.
4. Connect the red or white plug on the other end of the A/V cable
to the corresponding color-coded audio output port on your
video source.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 30 for instructions.
Audio adapter
note
Each input port has its own
dedicated audio input jack.
To play sound from a source,
you must connect the audio
cable to the correct audio
input jack.
When you switch the video
source, the projector
automatically plays sound
from the new source.