Filter
Top Products
31
Installing Seagate tape drive software
www.gateway.com
Installing Seagate tape drive
software
If you installed a Seagate tape drive, you need to install additional software.
Use the Seagate Backup Exec™ CD to install your tape drive software.
To install the Seagate tape drive software:
1 Start your computer.
2 Insert the Seagate Backup Exec CD into your computer’s CD or DVD drive.
3 If the Backup Exec setup program starts automatically, go to Step 7.
- OR -
If the Backup Exec setup program does not start automatically, go to the
next step.
4 In Windows XP, click Start, then click My Computer. The My Computer
window opens.
- OR -
In Windows Me, Windows 2000, Windows 98, or Windows NT 4.0,
double-click the
My Computer icon. The My Computer window opens.
5 Click/Double-click the CD or DVD drive letter (usually D: or E:). The CD
or DVD drive window opens.
6 Double-click Setup.exe.
7 Install the software by following the on-screen instructions.
8 When the software installation is complete, restart your computer.
Important If your computer is running Windows NT 4.0, you must
have administrator privileges for your local computer to
install the Seagate Backup Exec software.
If you reinstall Windows NT 4.0, you may need to reinstall
the Seagate Backup Exec software.