Filter
Top Products
111
Replacing the system board
www.gateway.com
Replacing the system board
To replace the system board:
1 Open the case by following the instructions in “Opening the case” on
page 92.
2 For more stability, place your computer on its side. To avoid scratching
the case, place it on a towel or other non-abrasive surface.
3 Remove all of the add-in cards by following the procedure “Adding or
replacing add-in cards” on page 103.
4 Disconnect the power and data cables from the system board, noting their
locations and orientation. (You will reconnect the cables after you install
the new board.)