Filter
Top Products
64
www.gateway.com
Chapter 5: Managing Power
4 Completely discharge the batteries by doing the following:
a From the desktop, right-click the power icon, then select Adjust
Power Properties
.
b Click the Power Schemes tab.
c Click the arrow button to open the Power Schemes list, then click
Always On.
d Click the Alarms tab.
e Click to deselect the Low battery alarm and Critical battery alarm
check boxes. Let the batteries drain until your notebook
automatically turns off.
5 After the batteries are completely drained, reconnect your notebook
to AC power.
6 Charge the batteries completely until the battery status indicator
turns blue.
7 When you are ready to use your notebook again, do the following:
a From the desktop, right-click the power icon, then select Adjust
Power Properties
.
b Click the Power Schemes tab.
c Click the arrow button to open the Power Schemes list, then click
Portable/Laptop.
d Click the Alarms tab.
e Click to select the Low battery alarm and Critical battery alarm check
boxes.
f Click OK.
Important Do not use your notebook during the recalibration process.
Do not connect the AC adapter to your notebook during
this process, or you will interrupt the recalibration process
and will have to start again.