Gateway M460 Network Card User Manual


 
65
www.gateway.com
Changing batteries
Changing batteries
If your notebook is connected to AC power or if it has a charged
secondary battery installed, you can change the main battery while the
notebook is turned on. If your notebook has only one battery and it is
not plugged into an AC outlet, you must turn the notebook off while
changing the battery.
Replacing the main battery
To replace the main battery:
1 If your notebook is on and is connected to AC power or has a charged
secondary battery installed, go to Step 2.
-OR-
If your notebook is on, is not plugged into an AC outlet, and does
not have a charged secondary battery installed, save your work and
turn off the notebook.
2 Close the LCD panel.
3 Disconnect your notebook from the optional port replicator (see
“Disconnecting from the port replicator” on page 86).
4 Turn your notebook over so the bottom is facing up.
Warning Danger of explosion if battery is incorrectly replaced.
Replace only with a battery specifically manufactured for
your Gateway notebook. Discard used batteries according
to the manufacturer’s instructions.
The battery used in this device may present a fire or
chemical burn hazard if mishandled. Do not disassemble,
heat above 212°F (100°C), or incinerate. Dispose of used
battery promptly. Keep away from children.