Filter
Top Products
www.gateway.com
61
5 Secure the new multimedia board, with the connector facing up, on the
keyboard cover.
6 Insert the multimedia cable to its connector on the multimedia board, then
close the clip to lock the cable in place.
7 Insert the tabs on the front side of the keyboard cover into the slots located
on the top corners of the palm rest assembly, then press down on the back
part.
8 Press down on the cover until it clicks in place.
The keyboard cover is correctly mounted when you can run you finger along
the sides of the cover and find no gaps.
9 Close the LCD panel and turn the notebook over so the base is facing up.
10 Secure the keyboard cover with the screws removed in step 3 of the
“Replacing the keyboard cover” procedure on page 58.
11 Reinstall the battery.
Caution
If the cover is not correctly installed, your notebook could be
damaged when you try to close the LCD panel.