Filter
Top Products
76
www.gateway.com
Chapter 7: Upgrading Your Computer
10 Make sure that the jumpers on the new drive are set the same as the drive you are
replacing.
11 Insert the new drive into the drive cage and secure it with the four screws removed
earlier.
12 Connect the drive cable and power cable to the drive.
13 Slide the drive cage into the computer until it clicks into place.
14 Close the case by following the instructions in “Closing the case” on page 72.
15 For instructions on installing Windows, your drivers, and your applications, see the
Using Gateway System Recovery online guide you printed in Step 2.