Filter
Top Products
Operations Manual: Safety
Voyager 3
Voyager 3
2004 General Binding Corporation
Page 1-5
1.5 Pneumatics
The pneumatic system used to provide upward
pressure on the pressure roller and the snap roller is
capable of producing great amount of forces. This
force is applied to any object presented in the open-
ing (called the nip) between the two rollers.
CA
UTION: Objects other than media, film or
approved substrates, will cause irreparable damage
to the rollers if caught in the nip.
Use care in raising the lower pressure roller and/ or
engaging the snap roller. Before engaging either of
these rollers, ensure that nothing is in the nip areas.
Know how to react quickly in an emergency. If any
problem or danger should occur, depress any of the
E-Stops, all functions of the machine are stopped
and the main pressure roller is lowered.
1.6 Heat
The heater can raise the main roller temperature
well of over 200°F ( 100°C ). At these temperatures,
you can become severely burned.
W
ARNING: Do not make contact with the
main roller when heat is applied. You may
become severely burned if not avoided.
W
ARNING: After heat is removed from the
main roller, avoid contact with the roller for at
least two hours. Heat is still present.
W
ARNING: Use extreme caution when the
main roller safety shield is raised and heat is
supplied.