Filter
Top Products
Operations Manual: Safety
Voyager 3
Voyager 3
2004 General Binding Corporation
Page 1-1
1.0 Safety
CAUTION: Do not attempt to operate your
Voyager 3 Laminator until you completely
read and understand this and all related
Operations Manual.
Your safety, as well as the safety of others, is impor-
tant to GBC. This section contains important safety
information pertaining to the Voyager 3 Laminator
which must be adhered to while operating, cleaning
and performing basic maintenance in and around
the machine.
For important safety information regarding the
Becker Pump, Soma Feeder or Sterlco
Water Temperature Control Unit, read the
operation manual provided by each of the compo-
nents manufacturer.
FCC NOTE
This equipment has been tested and found to
comply with the limits for a
Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference
when the equipment is operated in a commer-
cial environment.
This equipment generates, uses, and can radi-
ate radio frequency energy and,
if not installed and used in accordance with the
Operator Manual, may cause
harmful interference to radio communications.
Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the
user will be required to correct the interference
at his/her own expense.
CA
UTION: CHANGES OR MODIFI-
CATIONS NOT EXPRESSLY
APPROVED BY GENERAL BIND-
ING CORPORATION COULD VOID
YOUR AUTHORITY TO OPERATE
THE EQUIPMENT.
Canada Class A Notice - Avis Canada,
Classe A
This Class A digital apparatus complies with
Canadian ICES-3.
Cet appareil numérique de la classe A est con-
forme à la norme
NMB-003 du Canada.
1.1 Explanation of symbols
INFORMA
TION:
This symbol used to
inform you of important information per-
taining to the current subject.
CA
UTION: When you see this symbol,
use caution to avoid harm to you, or oth-
ers around you.
W
ARNING: This symbol is used to inform
you of a dangerous situation and tells you
how to avoid harm to you, others around
you or to the equipment
ELECTRICAL HAZARD: This symbol is
used to prevent an electrical shock condi-
tion that may be caused by an operators
action or machine function.
CA
UTION: When you see this word without a sym-
bol, it means the action described may result in
machine damage.
If for any reason you are unsure of what a symbol
represents, contact your local sales/service repre-
sentative for further explanation.