Filter
Top Products
Operations Manual: Specifications
Voyager 3
Voyager 3
2004 General Binding Corporation
Page 3-3
Other: Vacuum and blower adjustments
Conveyor:
Type: Vacuum style conveyor
Length: Min. 40” (101.6 cm)
Vacuum sections : Max. 4” (101.6 mm)
from downstream edge of feeder conveyor
with possibility to close two external sections
Belts: 3.2” (80mm) wide “Habasit” belts for vacuum conveyor
Lifting Mechanism:
Type: Lifting mech. with removable feeder table
design for 2000 lb (907 kg) load capacity
Moving increments:
1
/8” (3 mm) per increment in up direction
with full load and empty table as well
Other: Feeder will be supplied with one (1) removable table
Pile height sensor: Operating on all colors and reflective materials
Gating mechanism: Gating mechanism related to feeder head function
located between paper stock and conveyor
Paddles: (4) Paddles holding sheets from top on the conveyor
Clutch: Not required
Leveling pads: Adjustable pads M 20 with 1” adjustment
Air requirements:
Pressure: Min. 7 psi (.5 bar) (50 kPa)
Vacuum: Min. 6 psi (.5 bar) (40 kPa)
Consumption: 40 m3/h
Electrical plug connections: (1) plug for connection between feeder and laminator
(1) plug for air pump
Power Requirement: Power supplied by the laminator
3.3. Feeder Air Pump Specifications
Capacity at 50 Hz: 24 CFM (40 m
3
/h)
Pressure: Max. 9 psi (.6 bar) (60 kPa)
Vacuum: Max 9 psi (.6 bar) (60 kPa)