Filter
Top Products
Operations Manual: Safety
Voyager 3
Voyager 3
2004 General Binding Corporation
Page 1-2
1.2 General rules of safety
ELECTRICAL HAZARD: Do not operate
the laminator if power cord is damaged or
frayed.You can be severely shocked, elec-
trocuted or cause a fire.
ELECTRICAL HAZARD:
Employ a
licensed electrician to provide electrical
requirements for the laminator.
ELECTRICAL HAZARD:
Employ a
licensed plumber to provide tap and
drain requirements for the laminator.
ELECTRICAL HAZARD
: Do not use liq-
uid or aerosol cleaners on the laminator.
Do not spill liquid of any kind on the lami-
nator.You can be severely shocked, elec-
trocuted or cause a fire.
ELECTRICAL HAZARD:
Never discon-
nect any cable on the laminator
while power is supplied. Servicing
should be left to qualified service repre-
sentatives only.
ELECTRICAL HAZARD:
Do not attempt
to repair or service the laminator.
Servicing should be left to qualified service
representatives only.
W
ARNING: Do not operate this laminator
if you are not physically, psychologically or
emotionally fit. Do not operate this
machine until you have been trained and
read this manual in it’s entirety.
W
ARNING: Do not wear ties, loose fitting
clothes or dangling jewelry while operat-
ing or servicing the laminator.These items
can get caught in the nip and choke you or
you can be crushed or burned.
W
ARNING: Never tamper with the safety
devices to increase the laminator’s pro-
duction capacity. In the event a safety
device should fail, never attempt to
bypass it for operation. Consult a service
representative immediately.
W
ARNING: To prevent injury to others
working around the laminator, only one
person may control the functions of the
laminator during operation or servicing.
CA
UTION: The operating environment
must be free of dust, flammable liquids
and vapors.