Filter
Top Products
F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999Page 5 - 14
Operations
Refer to Figure 5.5.1 for proper roller
pressure.
INFORMATION
Figure 5.5.1 Roller pressure
Leader board
Proper pressure
Leader board
Excessive
pressure
d) Press REV t for a reverse motor direction.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0
e) Step on the variable speed footswitch to back
the leader board out.
f) The main roller nip has now been manually set.
g) On the control panel press FWD s for a
forward motor direction.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0
h) You may now begin mounting from the front
operating position.
5.5.2 Pull roller manual nip adjustment
If the main laminating rollers are heated,
mounting application may be run from the
rear operating position of the machine.
INFORMATION
a) Press FWD s for a forward motor direction.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0
b) Press GO. GO begins flashing indicating
“Footswitch” mode.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0