Filter
Top Products
F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999Page 5 - 4
Operations
( 19 ) SHUTDOWN : When pressed, automatically
raises the main roller gap setting to 1 in., turns the top
and bottom temperature controller units off and stops
the drive motor. The LCD on the control panel remains
illuminated and the SLEEP indicator will be solid.
SEL
SAV
SHUT DOWN
5
19
JOB
( 20 ) SPEED DISPLAY : Displays the current speed
setting of the laminator.
20
FWR
REV.
STOP
GO
SPEED
SAFETY
6.5
( 21 ) SPEED s : When pressed, increases the speed
of the laminator in increments of 0.5 ft/min. When
pressed and held, the speed will automatically increase
by 0.5 ft/min increments until it has reached the
maximum allowed speed of 15 ft/min.
21
FWR
REV.
STOP
GO
SPEED
SAFETY
6.5
( 22 ) SPEED t : When pressed, decreases the speed
of the laminator in increments of 0.5 ft/min. When
pressed and held, the speed will automatically decrease
by 0.5 ft/min increments until it has reached 0 ft/min.
22
FWR
REV.
STOP
GO
SPEED
SAFETY
6.5
( 23 ) GO : When pressed, starts the rollers in motion
and GO becomes solid. This solid indication is referred
to as the “panel mode”. If a safety shield is raised during
“panel mode”, GO and SAFETY ( refer to ( 27 )
SAFETY for explanation ) begin flashing enabling
“footswitch” mode. ( refer to ( 28 ) FOOTSWITCH
for explanation )
23
FWR
REV.
STOP
GO
SPEED
SAFETY
6.5
( 24 ) STOP : When pressed, stops the rollers and GO
becomes white, the FORWARD s or REVERSE t
will change to the default ( white ) background color.
24
FWR
REV.
STOP
GO
SPEED
SAFETY
6.5