Filter
Top Products
User’s Manual 51
Manageable 8/9-Port Switch
Step 3: Get Community Name
Move to highlight Get Community Name and press <enter>.
Enter text and press <enter>.
Step 4: Set Community Name
Move to highlight Set Community Name and press <enter>. Enter text and press <enter>.
Step 5: Trap Community Name
Move to highlight Trap Community Name 1 and press <enter>. Enter text and press <enter>.
Repeat to specify up to three more trap community names.
Step 6: Trap Host IP Address
Move to highlight Trap Host 1 IP Address and press <enter>. Type an IP address for trap host 1
and press <enter>. Repeat to specify up to two more trap host IP addresses.
Step 7: Cold Start Trap
Move to highlight Cold Start Trap and press <enter>. Decide to have it Disabled or Enabled.
Step 8: Warm Start Trap
Move to highlight Warm Start Trap and press <enter>. Decide to have it Disabled or Enabled.
Step 9: Link Down Trap
Move to highlight Link Down Trap and press <enter>. Decide to have it Disabled or Enabled.
Step 10: Link Up Trap
Move to highlight Link Up Trap and press <enter>. Decide to have it Disabled or Enabled.
Step 11: Authentication Failure Trap
Move to highlight Authentication Failure Trap and press <enter>.
Decide to have it Disabled or Enabled.
Step 12: Rising Alarm Trap
Move to highlight Rising Alarm Trap and press <enter>.
Decide to have it Disabled or Enabled.
Step 13: Falling Alarm Trap
Move to highlight Falling Alarm Trap and press <enter>.
Decide to have it Disabled or Enabled.
Step 14: Topology Change Trap
Move to highlight Topology Change Trap and press <enter>.
Decide to have it Disabled or Enabled.