GE GFK-2489 Network Router User Manual


 
4-12 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
4
ROOT: Operates as the Single Root Remote
ENCRYPT Sets or displays the configuration for data encryption.
Optional arguments:
MODE=<ON|OFF>—Sets or displays the data encryption mode.
ON: Data encryption on
OFF: Data encryption off
PHRASE=<string>—Sets or displays the Encryption Pass Phrase (8–41
characters).
CMD—Displays all settable optional arguments and their current values.
You can copy this list to a text file as a record of your configuration.
ETH Sets or displays the configuration of the Ethernet port. The port can be set to a
specific Ethernet address (static mode), or the address can be determined
automatically based on the first received packet (autoselect mode).
Optional arguments:
ENDPT=<string of bytes in hex that is the endpoint MAC address>—
Sets or dis-
plays the Ethernet endpoint address, and sets the endpoint address
behavior. The Ethernet address must be in the following format:
xx:xx:xx:xx:xx:xx.
Set ETH ENDPT to the device’s Ethernet address, or set the address to
a string of zeros to use the address of the source of the first received
packet.
ENDPTMODE=<auto, static>—Displays the endpoint IP address
behavior:
AUTO—Endpoint address is automatically set to the source
address of the first received packet
STATIC—Endpoint address is manually configured
MODE=<ON|OFF>—Determines whether the Ethernet port is enabled or
disabled.
ON: Ethernet port is enabled
OFF: Ethernet port is disabled
CMD—Displays all settable optional arguments and their current values.
You can copy this list to a text file as a record of your configuration.