Filter
Top Products
5-14 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
5
6. Press A to start the Serial Configuration Wizard.
Serial Port Configuration Menu
Welcome to the Serial Configuration Wizard. This wizard will assist
you in the configuration of your available Serial Data Ports.
A) Begin Wizard
B) View Current Settings
Select a letter to configure an item, <ESC> for prev menu, ‘Q’ to quit wizard
7. The first screen of the Serial Configuration Wizard prompts for the connection type. Press
A to select “Serial”.
Seria.l Configuration Wizard Menu
Please select the method the local serial port will be utiized.
It may either connect directly to a host, and have all of the data
go over the air to remote radio(s) [Serial] OR, it may connect directly
to some device and all of its data will go through the local ethernet
port [Network], OR it will connect directly to a NP3 device with all
of its data handled by the internal DNP3 router [DNP3].
The current method used is: Network
A) Serial (host linked directly to serial port)
B) Network (host linked through ethernet port to device
C) DNP3 (DNP3 device linked directly to serial port
D) Com2 RSG routing (Map broadcast packets to local Com2 Port)
Select a letter to configure an item, <ESC> for prev menu, ‘Q to quit wizard