Filter
Top Products
4-2 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
4
Log-in Procedure
You must log into the radio in order to issue commands. The log-in procedure for a Remote is
somewhat different than for an AP. Follow the procedure below:
1. At the entranet> prompt, enter “login”.
2. At the username prompt, enter your username (admin is the default).
3. At the Password prompt, enter your password (admin is the default).
Entering Remote Commands
To enter a command:
▪ Type the command (including any spaces), then press ENTER .
To request or set a value:
▪ Type the command, press =, then press ENTER .
For example:
▪ Type COMMAND_ARGUMENT= to query a setting or value.
▪ Type COMMAND_ARGUMENT=VALUE to set values.
To get help with a command:
Type the command, press SPACE , press ?, then press ENTER .