GE GFK-2489 Network Router User Manual


 
GFK-2489 Chapter 5 Sample Configurations 5-17
5
12. The next screen prompts for the Port Status. Press A to select Port Status. Press
SPACE to toggle between “enabled” and “disabled”. Press ENTER when “enabled” is
displayed. Then press N to continue.
Serial Configuration Wizard Menu
Please choose whether or not you would like to
enable this serial port for data communication.
A) Port Status enabled
B) Continue Wizard
Select a letter to configure an item, <ESC> for prev menu, ‘Q’ to quit wizard
13. The final screen displays all the previous settings for your review. The settings should be:
COM2 Port Status: Enabled
COM2 Mode: Serial to Serial
COM2 Remote Unit ID: broadcast
COM2 Remote COM Port: COM2
COM2 Baud Rate: 19200
COM2 Byte Format: 8N1
COM2 Buffer Size: 256 Bytes
COM2 Inter Packet Delay: 4 Character lines
Serial Configuration Wizard Menu
A) Com 2 Port Status enabled
B) Com 2 Mode Serial to Serial
C) Com 2 Remote Unit ID broadcast
D) Com 2 Remote COM Port Com 2
E) Com 2 Baud Rate 19200
F) Com 2 Byte Format 8N1
G) Com 2 Buffer Size 256 Bytes
H) Com 2 Inter-Packet Delay 4 Character Times
X) Commit Changes and Exit Wizard
Select a letter to configure an item, <ESC> for prev menu, ‘Q’ to quit wizard