GE GFK-2489 Network Router User Manual


 
4-4 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
4
Commands
The table below summarizes commands for the Remote transceiver.
Command Description Command Description
_? (after a
command)
When entered after a command in
this list, shows detailed information
and allowable entries
HELP
Lists commands supported for the logged-
in user. (See also the ? command at the
beginning of this table.)
ALARM Displays current alarm conditions by
class
LOG Sets or displays the event log information
APLIST Sets or displays serial numbers of up
to 50 APs with which the Remote
can associate
LOGIN Secure log-in. Prompts for the case-
sensitive username and password.
AUTH Sets or displays the Authorization
Key and a list of authorized features
LOGOUT Logs the user off and ends the terminal
session
COM1 Sets or displays the configuration of
COM1 port (baud rate, data format,
buffer size, inter-packet gap)
MESSAGE Sets the default priority level for message
pack ets (low, normal, high)
COM2 Sets or displays the configuration of
COM2 port (baud rate, data format,
buffer size, inter-packet gap)
PASSWORD Sets the user log-in password for the user
at current access level or below
CONFIG Shows the dump configuration of all
settable parameters
PROGRAM Performs a checksum verification on one
of six parameters
DEVICE Sets or displays the device
configuration, including owner,
company, and serial number
RADIO Sets or displays the radio configuration
and status
DIRECT Sets or displays the configuration for
direct mode operation
REBOOT Restarts the radio firmware
ENCRYPT Sets or displays the configuration for
data encryption
SLEEP Sets the low-power operating mode:
Sleep or Shutdown
ETH Sets or displays the Ethernet port
configuration
STATS Shows radio statistics
HANDOFF Sets or displays the hand-off
configuration
STAT-
TRACKER
When enabled (STATTRACKER ON),
sends UDP packets from the Ethernet
port on the Remote radio every time a
wireless packet is received
VER Displays the current version number