Filter
Top Products
20 CIMPLICITY® Display Station Touch Display: IC752CTD400/450
–
March 1998 GFK-1425B
Installing Network Driver on Microsoft Windows NT Systems
(IC752CTD450)
1
.
During the initial setup of Windows NT, the system will display a screen with the following
options already selected:.
“This computer will participate on a network.”
“Wired to a network:”.
Press E
NTER
to accept the default
2
.
Press the T
AB
key three times to select “Select from list…” option. Press
E
NTER
.
3
.
Page down (approximately 29 times) to select “Novell NE2000 Compatible Adapter.” Press
E
NTER
.
4
.
You should see your selection on the next screen. If okay, press E
NTER
.
5
.
If necessary, consult your network engineer to select the Network protocols and TCP/IP
address selection. In most cases, you will only need, the TCP/IP protocol, but it does not hurt
to enable all the protocols.
6
.
The Novell NE2000 Compatible Network Card Setup dialog box will pop up. Use the T
AB
key
and up and down arrow keys to select IRQ2 and I/O Address 340. Press E
NTER
.
7
.
The Novell NE2000 Adapter Bus Location dialog box will appear. Press E
NTER
.
8
.
In most cases, you will enter a specific unique IP address and not enable the DHCP option.
9
.
Follow the menus as displayed for finalizing your network setup.