Filter
Top Products
30
Model ATS1001D, -22
MODEL ATS1001D, -22
If your model ends in -22, order replacement ITEM ending in -22 if shown.
ITEM QTY PART# DESCRIPTION TYPE
2 2 17729 End pad, polystyrene, 7/18/1.375, not shown A
3 2 32403 Screw, 8-32x.3/8, Hex, Type F, steel, zinc C
4 1 37012 Nut, Nylock, 8-32, zinc plated C
5 1 50104 Clip, interlock B
6 1 50131 Interlock handle, circuit breaker B
8 1 50480 Actuator/Interlock Assm 100/100 B
9 1 50486 ATS Ovation™ Specification Sheet, not shown D
10 2 50487 Screw, 8-32x1 PFL TAPT ST ZP C
11 1 50488 Motor Assembly B
12 1 50489 * Control Module Assembly B
13 1 50497 Fuse Block, 20A, 600VAC, 10K AIC B
13-22 1 50506 Fuse Block, 20A, 600VAC, 100K AIC B
14 2 50498 Fuse 5A, 600VAC, 10K AIC B
14-22 2 50507 Fuse 5A, 600VAC, 100K AIC B
15 1 50502 Box, 21 3/8x7x26 7/8 PF-FOL A
16 1 50580 Cable, motor to controller, 48", 22AWG B
17 1 50585* Cable, AC voltage sense, 18AWG w/xformer B
18 1 50590 Cable, current sense, 18AWG B
19 1 50595 Cable, fuse block, 18AWG B
20 1 50598 Loadcenter, Siemens, 20/20, NEMA 1 B
21 1 50610 Deadfront, 1001D, modified, Siemens, 20/20 B
22 2 51008 Circuit breaker 100A, 2 pole, 120/240V, 10K AIC B
22-22 1 510081 Circuit breaker 100A, 2 pole, 120/240V, 22K AIC B
23 1 51037 Warranty Reply Card/Product Registration, not shown A
24 1 51147 Label, GENTRAN, silver/green (340), not shown A
25 1 72006 Label, "Gen, Util", not shown A
26 2 72009 Label, Serial Number, not shown A
27 1 72010 Label, SN, controller, not shown A
28 1 500502 DO NOT RETURN card, not shown A
29 1 530001 Manual: Installation, Operating and Maintenance, not shown D
30 4 50509 Cable clip, Nylon 66, natural, large B
31 1 50511 Cable clip, Nylon 66, natural, small B
32 1 3700091-01 Label, product, ATS Ovation™, 1001D, 10K AIC, not shown A
32-22 1 3700091-06 Label, product, ATS Ovation™, 1001D, 22K AIC, not shown A
33 1 50508 Screwdriver, mini, .100 straight blade, GT logo, not shown A
34 2 S7956W Label, date code, .4375x.75, white, not shown A
TYPE:
A = Non-Field Replaceable Item (Call Factory)
B = Field Replaceable Item (Call Factory to order parts)
C = Available at local hardware store or home center
D = Download from www.-gen-tran.com website
* NOTE: When electrical parts marked with * are replaced, an ATS calibration procedure must be performed. Contact Gen/Tran for System
Calibration Instructions, PN 530005.