Filter
Top Products
Setup
20 313855H
Cycle Mode Selection
If the Cycle Mode is selected you will also be prompted
to set the desired number of cycles.
NOTE: A cycle is equal to two switch closure transitions
at the cycle switch input.
10. Use the Arrow keys to move the cursor over the
CYCLES field.
11. Press ENTER.
12. Use the UP/DOWN arrows to move up and down
through the numbers 0-9 until the first number you
want in the CYCLES field is displayed.
13. Use the RIGHT arrow to move the cursor to the next
field. Repeat step 12.
NOTE: The maximum number of Cycles you can setup
in this field is 99.
14. Press RESET. The Main Screen, page 18 displays.
NOTE: When Cycles is selected, the Cycles Icon dis-
plays is the upper right corner of the screen.
PUMP OFF Setup
Sets up how the PUMP OFF cycle is ended: Time,
Machine Count switch activation, or Machine Count acti-
vations limited by a maximum time.
1. Use the UP/DOWN Arrow keys to move the cursor
over PUMP OFF.
2. Press ENTER to display the PUMP OFF setup
screen.
To Set the Pump OFF Option
1. Use the Arrow keys to move the cursor over the
PUMP OFF pull-down menu.
2. Press ENTER.
3. Use the UP/DOWN Arrow keys to move cursor to
select TIME, COUNT or BOTH.
4. After you make your selection, Press ENTER.
F
IG. 27
FIG. 28
F
IG. 29