Filter
Top Products
HandyTone-486 User Manual Grandstream Networks, Inc.
17
LAN DHCP Base IP:
Base IP for the LAN port, which function as a Gateway for the subnet.
Default value is 192.168.2.1
DHCP IP Lease
Time:
Value is set in units of hours. Default value is 120hr (5 Days.) The
time IP address are assigned to the LAN clients
DMZ IP:
Forward all WAN IP traffic to a specific IP address if no matching port
is used by HandyTone-486 itself or in the defined port forwarding.
Port Forwarding:
Allow the user to forward a matching (TCP/UDP) port to a specific
LAN IP address with a specific (TCP/UDP) port.
6.2.3 Advanced User Configuration
To login to the Advanced User Configuration page, follow the instruction in section 6.2.1 to
get to the following login page. The password is case sensitive and the factory default
password for Advanced User is ‘admin’.
Welcome to Grandstream HandyTone-486
Password
Login
Advanced User configuration page includes not only the end user configuration, but also
some advanced configuration such as SIP configuration, Codec selection, NAT Traversal
Setting and other miscellaneous configuration. Following is the snap shot of the
configuration page.
Grandstream HandyTone 486 Configuration
MAC Address:
00.0B.82.01.29.DA
Product Model:
HT486
Software Version:
Program--1.0.5.16 Bootloader--1.0.0.21 HTML--1.0.0.41 VOC--1.0.0.7
detected NAT type is full cone
Admin Password:
(admin user password to configure this IP phone)
End User Password:
(end user password to configure this IP phone)
WAN IP Address:
dynamically assigned via DHCP (default) or PPPoE