HP (Hewlett-Packard) 2012i Switch User Manual


 
25
CHAPTER
2
Installing and Cabling Enclosures
This chapter describes how to install and cable enclosures in a standard 19-inch EIA
rack cabinet. It contains the following sections:
“Required Tools” on page 25
“Safety Precautions” on page 26
“Installing Enclosures Into a Rack” on page 27
“Rack Installation Overview and Procedure” on page 28
“Attaching the Ear Caps” on page 31
“Connecting Controller and Drive Enclosures” on page 32
“Connecting AC Power” on page 35
“Testing the Enclosure Connections” on page 36
“Obtaining IP Values for Your Storage System” on page 37
“Correcting Enclosure IDs” on page 38
“Next Steps” on page 38
Required Tools
The installation procedures in this chapter require the following items:
#2 Phillips screwdriver
Standard screwdriver
Antistatic protection devices