Filter
Top Products
Diagnostics section
■ Network Statistics
■ Protocol Info
■ Configuration Page
Network settings
From the Networking tab, you can enable and configure the following network protocols:
■
TCP/IP
■ Internetwork packet exchange/Sequenced packet exchange (IPX/SPX)
■ AppleTalk
■ Data link control/logical link control (DLC/LLC)
■ Simple network management protocol (SNMP)
HP Toolbox
The HP Toolbox is a series of Web pages and supporting software tools that provide access to the
HP LaserJet 2410, 2420, and 2430 printer embedded Web servers and other firmware functions,
making them available on a browser-driven user interface where product properties can be viewed
and manipulated.
The HP Toolbox provides links to product status information, help information, and tools for
diagnosing and solving problems. The HP Toolbox also provides product status and settings
information from the embedded Web server, by clicking the Device Settings button in the upper-
right corner of each of the four tabs.
NOTE Because HP EWS is not supported for HP LaserJet 2410 and 2420 (base model)
printers, the link to the embedded Web server will not be functional for these printer models.
HP Toolbox requirements
HP Toolbox requires one of these recent Internet browsers in order to show embedded Web server
pages:
■ Microsoft Internet Explorer 5.5 or later (Internet Explorer 5.1 or later for Macintosh)
■ Netscape Navigator 7.0 or later (Netscape Navigator 7.0 or later for Macintosh)
■ Opera Software ASA Opera 7.0 for Windows
■ Safari 1.0 software for Macintosh
These browser requirements are not necessarily minimum standards, but they are the minimum
tested environments. Other, untested browsers might also provide access to the HP Toolbox screens.
The HP Toolbox is supported only for Windows 98 and later operating systems (Windows Me,
Windows 2000, Windows XP, and Windows Server 2003). You must have performed a complete
software installation in order to use the HP Toolbox.
Technology background information 41
Software description