Filter
Top Products
Product information
Getting Started 37
Telecommunications device approvals
The telecommunications device in the computer is approved for connection to the
telephone network in the countries and regions whose approval markings are
indicated on the product label located on the bottom of the computer or on the
modem.
Refer to the user guide included with the product to ensure that the product is
configured for the country or region in which the product is located. Selecting a
country or region other than the one in which it is located may cause the modem to
be configured in a way that violates the telecommunication regulations/laws of that
country or region. In addition, the modem may not function properly if the correct
country or region selection is not made. If, when you select a country or region, a
message appears that states that the country or region is not supported, this means
that the modem has not been approved for use in this country or region and thus
should not be used.
U.S. modem statements
This equipment complies with Part 68 of the FCC Rules and the requirements
adopted by the ACTA. On the bottom of the computer or on the modem is a label
that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. Provide this information to the telephone company if you
are requested to do so.
Applicable certification jack USOC = RJ11C. A plug and jack used to connect
this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation
instructions for details.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all locations, the sum of
RENs should not exceed five (5.0). To be certain of the number of devices that may
be connected to a line, as determined by the total RENs, contact the local telephone
company. For products approved after July 23, 2001, the REN for this product is
part of the product identifier that has the format US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
For earlier products, the REN is separately shown on the label.
If this HP equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service may
be required. But, if advance notice isn't practical, the telephone company will
notify you as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
462939-001.book Page 37 Thursday, March 20, 2008 9:03 AM