Filter
Top Products
Communications
Startup and Reference Guide—Part 2 7–9
7. Select your modem > Properties button > Modem tab.
8. Clear the Wait For Dial Tone Before Dialing check box.
9. Select the OK button > OK button.
Accessing Communication Software
To access preinstalled modem software, including software
for terminal emulation and data transfer, select Start > All
Programs > Accessories > Communications, then select an
application, wizard, or utility.
Finding AT Command Information
It is not necessary to use AT commands with most modem
software. If you prefer to use AT commands, refer on the
Documentation Library CD to:
■ Modem Commands Guidelines (Advanced Users Only) for
information about accessing HyperTerminal, identifying the
modem model in your notebook, and using AT commands.
■ The Lucent/Agere Command Set (Advanced Users Only)
guide for the AT commands supported by a Lucent/Agere
modem. If your notebook shipped with an internal modem,
that modem supports the Lucent/Agere command set. For
command updates and supplementary information about your
Lucent/Agere modem, visit:
http://www.agere.com
The Lucent/Agere command set guide is provided on the
Documentation Library CD in English only.
CPQ-311245-001.book Page 9 Tuesday, April 1, 2003 3:55 PM