Filter
Top Products
1-15
Installing the Tape Library
Step 4: Mount the Library in a Rack (optional)
Installation
4. Attach the rear bracket:
a. Adjust the rear mounting brackets to fit lengthwise in the rack.
b. Attach the rear slide mounting bracket to the rear clip nuts using two 10-32 x
5/8 pan slotted phlp screws.
c. Push the slides as far as possible toward the outside of the rack.
d. Tighten the screws.
e. Tighten all bracket screws.
Figure 1-9 Rear Bracket on Rack
5. Extend the slides fully, make sure they are parallel, and then recompress them.