Filter
Top Products
3-25
Operating the Library
Setting Configuration Options
Library Operation
Setting Configuration Options
You can set certain options to customize the way the library operates. These options
are called configurations.
To change a configuration:
1. Verify that the drive status displays (if not, press
CANCEL until it does).
2. Press
NEXT until ADMIN * displays, then press ENTER.
3. Enter the three-part numerical password (see “Entering the Administration
Menu Password” on page 3-9).
4. INFO * displays. Press
NEXT until CONFIG * displays, then press ENTER.
5. Press
NEXT or PREV until the name of the configuration you wish to set displays,
then press
ENTER. If the configuration has multiple settings, the current setting
flashes. Otherwise, the configuration option is set and a confirmation message
displays. (Configuration options are described on the following pages.)
If the current configuration setting is flashing, press
NEXT or PREV until the
desired setting displays, then press
ENTER. OPTION SAVED displays.
6. Press
CANCEL to return to the drive status (“ready” state).
The table on the following page describes the available configurations.
1 2 → ADMIN * → CONFIG *