Filter
Top Products
EN
Loading Media
17
2
Loading Envelopes into Tray 1
For printing envelopes, Hewlett-Packard recommends that
Tray 1 be configured in the printer control panel as a cassette.
(See the section earlier in this chapter on configuring input
trays.) When the tray is configured as a cassette, you can
specify envelope size.
WARNING!
Envelopes can only be printed from Tray 1. This tray holds up
to 10 envelopes.
1
Slide the media-width guides (1) all the way open and pull
up the tray extension (2).
2
Load up to 10 envelopes as shown in the illustration (3)
into Tray 1. The envelopes should sit squarely in the
bottom of the tray.
3
Slide the media-width guides in until they hold the
envelopes firmly in place without bending them.
Note
For more information, see the section later in this chapter on
printing envelopes.