Filter
Top Products
e. Lift the bezel at the seam in the hinges until it disengages from the display enclosure (5).
f. Remove the bezel from the display enclosure.
The display bezel is available using spare part numbers 536423-001 on computers with 14.0-in
displays and a webcam and 536422-001 on computers with 14.0-in displays and no webcam.
7. If it is necessary to replace the webcam module from the display enclosure, gently pull the webcam
module away from the double-sided tape on the display enclosure (1) and disconnect the webcam
cable from the module (2). The webcam module is available using spare part number
535797-001.
NOTE: To replace the webcam module in the display enclosure, align the holes on the webcam
module with the pins on the display enclosure and press onto the double-sided tape.
8. If it is necessary to replace the display hinges:
a. Remove the display panel by removing the two Phillips PM2.5×4.5 screws (1) that secure the
panel to the display enclosure.
Component replacement procedures 93