Filter
Top Products
5. If it is necessary to replace the webcam module from the display enclosure, gently pull the webcam
module away from the double-sided tape on the display enclosure (1), disconnect the webcam
cable from the module (2), and then remove the webcam. The webcam module is available using
spare part number 535797-001.
NOTE: To replace the webcam module in the display enclosure, align the holes on the webcam
module with the pins on the display enclosure and press onto the double-sided tape.
6. If it is necessary to replace the display hinges:
a. Remove the display panel by removing the four Phillips PM2.5×4.5 screws (1) that secure the
panel to the display enclosure.
b. Lift the panel from the enclosure (2).
c. Remove the eight Phillips PM2.0×3.0 screws (1) that secure the display hinges to the display
panel.
Component replacement procedures 81