Filter
Top Products
11. Remove the 21 PM2.5×6.0 screws that secure the top cover to the computer.
NOTE: Two of these screws (one of each side) also secure the display panel to the computer.
12. Remove the Phillips PM2.0×4.5 screw that secures the top cover to the computer.
13. Lift the top cover until is disengages from the base enclosure (1). Locations at which the top cover
more securely connects to the base enclosure are indicated by callout (2).
14. Remove the top cover.
Reverse this procedure to install the top cover.
Component replacement procedures 87