Filter
Top Products
System Installation Document Packet
To keep track of the hardware configuration, internal and external communications cabling, IP
addresses, and connect networks, assemble and retain as the systems records an Installation
Document Packet. This packet can include:
• “Technical Document for the Factory-Installed Hardware Configuration”
• “Configuration Forms for the ServerNet Adapters and CLIMs”
Technical Document for the Factory-Installed Hardware Configuration
Each new NonStop BladeSystem includes a document that describes:
• The cabinet included with the system
• Each hardware enclosure installed in the cabinet
• Cabinet U location of the bottom edge of each enclosure
• Each ServerNet cable with:
— Source and destination enclosure, component, and connector
— Cable part number
— Source and destination connection labels
This document is called a technical document and serves as the physical location and connection
map for the system.
Configuration Forms for the ServerNet Adapters and CLIMs
To add configuration forms for ServerNet adapters or CLIMs to your Installation Document
Packet, copy the necessary forms from the adapter manuals or the CLuster I/O Module (CLIM)
Installation and Configuration Guide. Follow any planning instructions in these manuals.
30 NonStop BladeSystem Overview