Filter
Top Products
Hardware options installation 53
18.
Install the fan into location 4 of the fan cage, and then route the fan cable through the cable
management slot.
19. Install the fan module into the server, tighten the two thumbscrews, and then connect all fan cables to the
system board.
20. Install any PCI cards that were removed.
21. Install the system air baffle (on page 30).
22. If removed, install the PCI air baffle (on page 29).
23. Install the access panel (on page 26).
24. Power up the server (on page 22).
25. Do one of the following:
o For tower models, install the bezel, and then return the server to an upright position ("Install the
tower bezel" on page 23).
o For rack models, install the security bezel, and then install the server into the rack ("Security bezel
option" on page 47).