Filter
Top Products
1 The basics
21
Loading input trays
1 Open Tray 1.
2 Load A4- or Letter-size paper with the long edge leading into the
product. See “Paper specifications” on page 83 for more
information on loading custom sizes.
CAUTION
To avoid jams, print sheets of labels one at a time.
3 Adjust the paper guides so they lightly touch the paper stack,
but do not bend the paper.
4 Make sure the paper fits under the tabs on the guides and not
above the load level indicators.
Note
If printing on A3- or Ledger-size paper, also pull out the tray
extension until it stops.
Note
By default, Tray 1 Size is set to Any. If you do not specify a size, any
job sent to the product prints from Tray 1, if print media is loaded in
the tray.
2
3
1
ENWW