Filter
Top Products
1 The basics
28
Loading input trays
To set a custom size for Trays 2, 3, and 4
1 Make sure the switch inside the tray you want to configure is in the Custom position.
2 A message on the control panel prompts you to enter the paper size.
3 Touch unit of measure (Millimeters or Inches). (The default is Millimeters because the marks on the tray
guides are in millimeters.)
4 Use the numeric keypad to select the X (front to back) dimension.
5 Touch OK.
6 Use the numeric keypad to select the Y (left to right) dimension.
7 Touch OK to exit the menus.
ENWW