Filter
Top Products
4 Walk-up copying
45
Modifying copy settings for the current job
Modifying copy settings for the current job
You can modify your copies by adjusting the contrast, reducing or enlarging, or enhancing.
Adjusting the copy contrast
You can adjust the contrast by touching the arrows on the Contrast Control bar. The slider moves to the
lighter or darker area of the Contrast Control bar.
Reducing or enlarging copies
The product has an autoscaling feature. If there is a difference between original paper size and copy paper
size, the product can autodetect a size mismatch between the original page size and the copy page size. The
original image is reduced or enlarged automatically to match the copy paper size. You can override
autoscaling using the reduce and enlarge feature.
The product can reduce copies to as little as 25 percent of the original size and enlarge copies to as much as
400 percent of the original (200 percent using the ADF).
To reduce or enlarge your copies, touch the arrows on the Reduce/Enlarge button until you obtain the desired
reduction or enlargement. The scale percentage box in the center of the Reduce/Enlarge button indicates the
percentage of reduction or enlargement.
Enhancing copies
You can enhance the quality of your document by touching Enhance to gain access to the enhancement
screen.
Background Removal
If you copy a document that is printed on colored paper, or if you use two-sided copying, you can enhance
your copy quality by removing the background that might cause your copy to streak or blur. Touch the
Enhance button to gain access to the embedded Background Removal screen. Adjust the amount of
background removal by touching the arrows on the Background Removal Control. The slider moves to the
lighter or darker area of the Background Removal Control bar.
ENWW