Filter
Top Products
Use the control panel
The control panel has a VGA touchscreen that provides access to all device functions. Use the buttons
and numeric keypad to control jobs and the device status. The LEDs indicate overall device status.
Control-panel layout
The control panel includes a touchscreen graphical display, job-control buttons, a numeric keypad, and
three light-emitting diode (LED) status lights.
1 Attention light The Attention light indicates that the device has a condition that requires
intervention, such as an error message on the touchscreen.
2 Data light The Data light indicates that the device is receiving data.
3 Ready light The Ready light indicates that the device is ready to begin processing a job.
4 Brightness-adjustment dial Turn the dial to control the brightness of the touchscreen.
5 Touchscreen graphical display Use the touchscreen to open and set up all device functions.
6 Numeric keypad Use the keypad to type numeric values, such as a fax number.
7 Sleep button and light If the device is inactive for a long period of time, it automatically enters Sleep
mode. To place the device into Sleep mode or to reactivate the device, press
the Sleep button. When the light is glowing, the device is in Sleep mode.
8 Reset button Resets the job settings to factory or user-defined default values.
9 Stop button Stops the active job. While stopped, the control panel shows the options for
the stopped job (for example, if you press Stop while the device is
processing an e-mail job, the control panel message prompts you to cancel
or resume the job).
10 Start button and light Starts digital sending, or resumes a job that has been interrupted. When the
light is glowing, the device is ready to start scanning.
12 Chapter 2 Control panel ENWW