HP (Hewlett-Packard) 958-000290-000 Network Router User Manual


 
B–2 edge switch 2/32 installation guide
Technical Specifications
Table B–2: Switch Factory-Default Values for Reset
Configuration Option
Configuration Description Default
Identification Switch Name NULL string
Switch Description “Fibre Channel Switch”
Switch Contact “End User Contact (please
configure)”
Switch Location “End User Contact (please
configure)”
Ports Port Names NULL strings
Port Blocked States Unblocked
Extended Distance (10-100km) Disabled
LIN Alerts Disabled
Port Address Port number plus 4
Ports enabled 16
Switch
Addressing
IP Address 10.1.1.10
Subnet Mask 255.0.0.0
Gateway Address 0.0.0.0
MAC Address PROM value
Operating Mode Must select one of two modes:
Homogeneous mode or Open
Fabric 1.0. The recommended
mode is Open Fabric 1.0.
Homogeneous mode
Operating
Parameters
Preferred Domain ID 1
Buffer-to-Buffer Credit 60
R_A_TOV 10 seconds (100 tenths)
E_D_TOV 2 seconds (20 tenths)
Switch Priority Default
Switch Speed 2 Gb/sec
Rerouting Delay Disabled