Filter
Top Products
2-58 edge switch 2/32 installation guide
Installing and Configuring the Edge Switch 2/32
Configure Switch and Fabric Parameters
Perform this procedure to configure the following switch and fabric operating
parameters: Buffer-to-Buffer Credit (BB_Credit), Error Detect Time Out Value
(E_D_TOV), and Resource Allocation Time Out Value (R_A_TOV), preferred
domain ID and switch priority.
Configure Switch Parameters
The switch must be set offline to configure operating parameters. To configure the
parameters:
1. Set the switch offline as follows:
a. At the View panel, select Operations at the left side of the panel. The
Operations panel opens with the Switch Beacon page displayed.
b. At the Current State window, click Set Offline. The message Your
operations changes have been successfully activated
displays.
2. At the View panel, select Configure at the left side of the panel. The Configure
panel opens with the Ports page displayed.
3. At the Configure panel, click the Switch tab, then select Parameters. The
Switch page displays with Switch Parameters displayed.
4. Set the switch parameters: