Filter
Top Products
Installation Overview
0 . .
Figure 1. Installing a SCSI adapter, overview
F’lgure 1 presents an overview of installing the adapter in an HP 9000 Series Xxx
computer system. The procedure is slightly different for the HF’ 9000 Series T6xx and will
be noted where different. Installing the SCSI adapter consists of the following major steps:
Shut down the operating system using shutdown -h 0 (not reboot) and turn
computer power off.
Install the adapter
Connect cables and peripheral devices, and check for no duplicate ADDX.
Terminate the SCSI bus.
Switch power on to the peripherals, then to the computer.
Configure the software to include the adapter.
Verify operation.
12 hstdlation Procedures