Filter
Top Products
Removal/Replacement Instructions
Removal of the SCSI adapter is the opposite of installation.
Follow the instructions
presented here and refer to the installation procedures on page 20.
CAUTION
The adapter contains electronic components that can be damaged
by
static electricity. To avoid damage, follow these guidelines:
n
Store adapters in their conductive plastic bags.
H If possible, work in a static-free area.
n
Handle adapters only by the edges. Do not touch electronic components
or electrical traces.
Use a grounding wrist strap connected to the
metallic chassis of the host computer.
Removal/Replacement of the Adapter
For
adapter
removal, follow the procedures below:
1. Before removing the adapter, ensure the operating system is shut down and
power to the computer and all devices is switched off and disconnected.
Consult your computer documentation for proper shutdown
procedures to
avoid file corruption or loss of data.
2. Disconnect all cabling from the adapter.
3. Refer to the installation procedures on page 20.
To install a replacement adapter, follow the procedures described on page 20.
42 Service Information