Filter
Top Products
Switch Power on to Peripherals, then to the
Computer
Before applying power to your system, follow these guidelines:
1.
Verify all cables are connected and securely fastened.
2.
Switch power on to your peripheral devices and wait for them to become
ready before you switch power on to your computer.
3.
Switch power on for your computer.
When the computer’s power is switched on, power is supplied to the SCSI adapter. The
SCSI adapter supplies termination power to the SCSI bus. Some peripheral devices
may also supply SCSI bus termination power.
CAUTION
Do
not switch power on or off on any device connected to an
active SCSI bus. Similarly, devices should not be added to, or
removed from,
an active
SCSI
bus.
Failure
to comply may
result in data corruption or
loss, or damage to hardware.
installation Procedures 33