Filter
Top Products
Configure the Operating System and the Adapter
The HP-HSC Fast/Wide Differential SCSI adapter should au&xonfigure into supported
HP-UX systems.
When the operating system reboots it will determine your adapter has
been installed and will install the correct software device files necessary for the
operating system to communicate with peripherals connected to the adapter.
Verm Operation
The only indication of proper operation on the adapter is the green TERM POWER LED
located on the adapter bulkhead.
If this LED is on, it indicates the adapter is supplying
termination power to the SCSI bus.
If the TERM POWER LED is off, refer to the Service Information chapter of this manual
for help.
If the TERM POWER LED is on but the SCSI device connected to the adapter does not
operate properly and you suspect the adapter is malfunctioning, refer to the Service
Information chapter of this manual for help.
34
InstallationRocedures