Filter
Top Products
7.
Before you push the connector on the SCSI card into the mating connector
on the I-EHSC bus converter, turn the captive screws on the HP-HSC bus
converter until they engage the SCSI card, but do not tighten the screws.
8.
Align the connectors, then press them together securely.
9.
Tighten the HP-HSC bulkhead screws to secure the SCSI adapter to the
HP-HSC I/O bus converter.
10. Re-install the HP-HSC I/O bus converter in the computer system.
Refer to
the computer system manual for instructions on installing the HP-HSC bus
converter.
28 Installation Procedures