Filter
Top Products
USER GUIDE FOR HP 6 COLOR PLUGIN
AG50324 Rev. 7 14
Note: If the ProofReady profile drop-down list in not available in your page setup, enable color management in
your RIP.
7.2 Changing the default screening method
The screening mode used in an output device may be changed if the device supports alternative screens. Refer to
Table 1 on page 5 for a list of devices and the screens they support.
To change the screening method used by a device, do the following:
1. In the Harlequin RIP, choose Color > Separations Manager to open the Separations Manager.
2. From the Device list, select the HP Designjet device that you want to configure.
3. From the Style Name list, select the style you want to change, and choose Edit to open the Edit Style dialog,
Figure 11.
4. From the Dot shape menu, select the screening method you want to use.
ProofReady profile Device Paper type (HP Ref)
Resolution
(dpi)
HP Photo Gloss 600 DJ5000 Contone
42 Sheet
DJ5000 Contone
42 Sheet
DJ5000 60
Contone Roll
DJ5000 60
Contone Sheet
Photo Imaging Gloss
C6964A, C6965A
600x600
HP Photo Gloss 600 DJ5000 Contone
42 Sheet
DJ5000 Contone
42 Sheet
DJ5000 6-Col 42
Roll
DJ5000 6-Col 42
Sheet
DJ5000 Contone
60 Roll
DJ5000 Contone
60 Sheet
DJ5000 6-Col 60
Roll
DJ5000 6-Col 60
Sheet
Photo Imaging Gloss
C6964A, C6965A
600x600
Table 3 HP 6 color ProofReady profiles