Filter
Top Products
Raise the output tray to load paper or other media. Lower the output tray before printing.
To prevent paper from falling out of the output tray, pull out both sections of the output-
tray extension. If you are printing in the Fast Draft mode, raise the output-tray extension
stop.
1 Second section of output-tray extension
2 Output-tray extension stop
Fold the paper trays
To fold the paper trays
1. Remove paper or other media from the paper trays.
2. If the output-tray extension stop is raised, lower it and then push the second section
of the output-tray extension in.
3. Push the first section of the output-tray extension into the output tray.
Chapter 3
18 Get started