Filter
Top Products
Sense Data Values
131ESL E-Series Tape Library User’s Guide
525 00LOGICAL UNIT IS NOT SUPPORTED
Verify the logical unit field specified in the command contains a
legitimate logical unit number. Check cabling to logical unit.
52600INVALID FIELD IN PARAMETER LIST
Verify Mode Select page fields. Verify that fields comply with
command format described in this guide.
52602PARAMETER VALUE INVALID
Verify Mode Select page fields. Verify that fields comply with
command format described in this guide.
This response is also returned for commands issued to the diagnostic
interface of the library if an invalid parameter is sent.
628 01IMPORT OR EXPORT ELEMENT ACCESSED
Load port door has been closed.
629 00POWER-ON, RESET OR BUS DEVICE RESET OCCURRED
Informational message. If power on occurs, the host user should
assume the inventory may have changed, and should ask the library
for that information again.
629 01POWER-ON RESET OCCURRED.
Informational message. If power on occurs, the host user should
assume the inventory may have changed, and should ask the library
for that information again.
629 02BUS RESET OCCURRED.
Informational message. If power on occurs, the host user should
assume the inventory may have changed, and should ask the library
for that information again.
629 03BUS DEVICE RESET OCCURRED
Informational message. If power on occurs, the host user should
assume the inventory may have changed, and should ask the library
for that information again.
Table 22: Sense data values (Hexadecimal) (Continued)
Sense
Key
ASC ASCQ Message Name/Description